Periodic Audio Announces the Nickel Portable Headphone Amplifier

By |


Periodic-Nickel.jpgPeriodic Audio has introduced the tiny, lightweight Nickel portable headphone amplifier, which measures just two inches long by 1.25 inches wide by a half-inch thick. The headphone amp's output is listed at 50mW into 50 ohms, 250mW into 32 ohms, and 270mW into 16 ohms, and it has a fixed three dB of gain. Periodic's patent-pending SmartSwitch technology senses the presence of the input and output connectors to automatically turn the amp on and off, and the rechargeable battery has a run time of eight to 10 hours. The Nickel will be available in November for $299.99.

From Periodic Audio
Periodic Audio is pleased to announce the world premiere of the Nickel Portable Amplifier. With its compact and lightweight design, the Nickel amplifier exemplifies portable convenience: it measures just two inches long, 1.25 inches wide, half an inch thick, and weighs only half an ounce. Its polycarbonate body provides a strong yet lightweight, reliably durable enclosure to withstand the demands made on a portable product. With a specified output of 250mW into a 32-ohm load and typical run times of eight to 10 hours, the Nickel amp will surely meet the demands of today's mobile listener.

"We are thrilled to expand our offerings by launching our very first electronics product, the new Nickel amp," said Dan Wiggins, co-founder of Periodic Audio. "Periodic Audio's mission is to deliver high-quality audio that fits in your watch pocket--we specialize in creating products that deliver superb dynamic range from the smallest of packages. Given that most of today's listeners use a smartphone as a source, we created a product to work with a phone rather than working around it. Nickel pulls effectively zero power from the phone, using it only as the DAC. We believe that the leap in performance from using just a phone to using the Nickel, combined with our award-winning Be IEMs, is comparable to the difference between using an integrated amplifier and using a separate preamp and high-power amp in a home system."

The Nickel amplifier is capable of producing high levels of power. It will supply 150mW into 50 ohms, 250mW into 32 ohms, or 270mW into 16 ohms. The Nickel is stable into an eight-ohm load, making it ideal for nearly any set of headphones on the market. A fixed three dB of gain allows higher headroom than most phones and DACs can generate, but is low enough to maintain nearly the full dynamic range of volume from any source.

The Nickel amplifier includes Periodic Audio's patent-pending SmartSwitch system. The Nickel has no on/off switch; rather, it uses its internal MCU to sense the presence of the input and output connectors. Only when both connectors are occupied will the Nickel turn itself on. Once turned on, battery level is constantly displayed on the integrated LED light pipe, which will change from green to yellow to red as the battery charge drops. Turning off the Nickel is as simple as unplugging the source or the headphones.

The Nickel amplifier has a two-stage power-supply system. A dedicated battery charger is used to keep the 220mAh battery charged and conditioned. The battery feeds a dedicated dual-voltage converter that generates dedicated ±5V analog power rails. This topology virtually eliminates USB switching noise--the listening experience is not compromised, even when charging the battery.

The Nickel amplifier is designed to provide clean, nearly unlimited power for almost every type of headphone in an extremely compact and portable package. All aspects of mechanical and electrical design, including layout of the four-layer SMT board, were completed in-house, with full custom tooling for all parts. The Nickel is designed, engineered, and built in the USA.

The Nickel contains a 3.5mm audio input jack, a 3.5mm output jack for headphones, and a micro-USB port for charging the battery.

Accessories:
Eight-inch-long USB Type A to Micro B charging cable
Six-inch-long 3.5mm TRRS to 3.5mm TRRS audio cable to connect your phone to the Nickel

MSRP: $299.99
Available: Mid November

Additional Resources
• Visit the Periodic Audio website for more product information.
Periodic Audio Be (Beryllium) In-Ear Monitors Reviewed at HomeTheaterReview.com.


  • Comment on this article

Post a Comment
comments powered by Disqus

Latest News

Dec 08
THX and Monoprice Team Up to Deliver New Headphone Amps THX and Monoprice have teamed up to offer two new DAC/headphone amplifier designs, based on THX's AAA technology. Part of...
THX and Monoprice Team Up to Deliver New Headphone Amps

Dec 07
Parasound Introduces the ZoneMaster 2350 Stereo Amplifier The latest addition to Parasound's ZoneMaster line, the new 2350 stereo amplifier is rated at 350 watts per channel into...
Parasound Introduces the ZoneMaster 2350 Stereo Amplifier

Dec 06
Klipsch Introduces the Reference RF-7 III Tower Speaker Klipsch has added a new passive tower speaker to its Reference Series. The RF-7 III ($1,799 each) features a new...
Klipsch Introduces the Reference RF-7 III Tower Speaker

Dec 05
Puro Sound Labs Debuts JuniorJams Wireless, Volume-Limiting Headphones Puro Sound Labs has introduced a new volume-limited wireless headphone targeted at kids. Like other Puro Sound offerings, the JuniorJams...
Puro Sound Labs Debuts JuniorJams Wireless, Volume-Limiting Headphones

Dec 04
New Philips Roku HDTVs Hit the Market Back in mid-November, Roku announced that a new line of Philips-branded TVs would feature the Roku TV OS, and now...
New Philips Roku HDTVs Hit the Market