Valfet Audio Power Amplifier Reviewed

Published On: February 13, 1989
Last Updated on: October 31, 2020
We May Earn From Purchases Via Links

Valfet Audio Power Amplifier Reviewed

The Audio Power Amp from Valfet doesn't look like any other amp on the market. It's a massive black cube with tubes inside, rated at 75-watts in Class A mode, or 200-watts into Class B. Read a rare review of this classic power amp.

Valfet Audio Power Amplifier Reviewed

By Author: Home Theater Review
The staff at HomeTheaterReview.com is comprised of experts who are dedicated to helping you make better informed buying decisions.

Valfet-Amp-Review.gif

Valve scarcity and solid-state progress have almost forced valve

amp manufacturers to blend the two technologies. While a number of purists survive -- those who wouldn't dream of mixing solid-state circuitry with that of tubes -- the trend has been to combine the two with the resultant benefits of easier parts
sourcing, lower costs and greater reliability. The secret to successful 'hybridisation' seems to be the ability to retain the sonic virtues of the valves themselves.

Additional Resources
Read audiophile power amp reviews from the likes of Krell, Mark Levinson, Audio Research, Linn, Naim, VAC, VTL, NuForce, Pass Labs and many others here.
Read about tubes on the Audiophile blog, AudiophileReview.com.
• Want to read audiophile stereo preamp reviews? We have dozens from brands like ARC, Krell, Classé and many more.
• In the market for audiophile loudspeakers? Here are over 100 reviews from brands like Wilson Audio, THIEL, MartinLogan, Bowers & Wilkins, PSB, Vandersten, Magnepan and many more.

I'm suffering a bit of a memory block today, so I can only come up with one British manufacturer of hybird power amplifiers prior
to the appearance of the Valfet. Think back a decade to the
massive Radford TT100 hundred-watter with a solid-state front-end
and valve output stages and you've pretty much covered it. (I
trust that readers will inform me of the British hybrids I've
forgotten...) But while the Radford was a valve/solid-state
hybrid, it retained the less-appealing and riskiest parts of
valve amplification such as the massive, heat-generating output
tubes, huge chassis, etc. What the Americans produced were the
opposite -- valves up front and solid-state devices providing the
output -- to create smaller, cooler-running devices like the
myriad Counterpoint hybrids and the sadly-departed Moscodes from
New York Audio Labs. But now the British can boast a home-grown
valve/MOSFET hybrid, the Valfet Audio Power Amplifier from the
Valfet Audio Manufacturing Co Ltd.

Designer Antony Johns has produced an unbelievably neat and
compact amplifier conservatively rated at 75W in Class A or 200W
Class B into a 4 ohm load. You can actually ignore the power
ratings because numbers really have no bearing on performance
(viz. the 20W NAD 3020, the 15W Radford STA15, the 50W Krell
KSA-50, ad infinitum). His main priority has been simplicity,
reflected in the use of a single valve (the common-as-muck ECC83)
as a basic voltage amplifier driving a very fast, high impedance
FET input. The cubist chassis -- each monoblock measures only
190x285x280 (HWD) -- appears to be nearly 30% heatsink, necessary
because Johns has endowed the unit with selectable Class A or
Class B operation, accessible via switches at the back. Also
selectable are impedances of 4 or 8 ohms, enabling the user to
tailor the operation to suit the difficulty of the speaker load.

Removal of the lid shows the amplifier to be jam-packed, but not
quite the servicing nightmare it could be. The layout is
sensible, including whole stages on plug-in cards (connected via
computer-grade fittings), the easy-to-access valve, a
high-current power supply mounted near the output transistors and
next to the output terminals, a separate subchassis for the four
large electrolytic smoothing capacitors and complex but
straightforward construction. The high price (which I'm saving
for later) is partly accounted for by the high-quality
components, a veritable What's What of designer ingredients. The
Valfet employs hardware including a purpose-built Arrow on-off
switch, Schaffner mains input filter, Molex gold-plated PCB
connectors, Holco precision metal film resistors and other bits
and pieces revealing no truck with cost-cutting.

The on/off switch resides on the front, next to an LED which
changes colours according to the amplifier's mode and power
output (4 or 8 ohm operation, Class A or Class B operation etc).
At the back are robust four five-way speaker terminals suitable
for bi-wired systems, the aforementioned toggles for 4 or 8 ohms
and Class A or Class B operation, and an input in the form of a
1/4in socket plus a phono-to-1/4in adaptor. This will be changed
to a standard phono socket on production samples for domestic
users.

Installation and operation were as straightforward as can be, the
Valfet working admirably with a number of preamps including the
Audio Research SP-9, Audion and Concordant and speakers ranging
from the Apogee Diva to easier loads like the TDL Studio 1,
Celestion SL700 and Monitor Audio R1200 Gold. I used the unit
almost exclusively in Class A/4 ohm mode, mainly because 95% of
my listening involved sensible levels. Major-league headbanging
required the Class B setting to avoid the onset of audible
clipping. Warm-up time was surprisingly fast, the Valfet sounding
as good as it gets after only 15 minutes.

And good it is. After all these years with me bitching about the
paucity of true high end amplifiers made in the UK, along comes
this magnificent performer without any fanfare at all. Its image
is like its sound: easy to ignore. For the former that's an
insult, for the latter a compliment. The Valfet is exquisitely
neutral, imposing so little on the midband signal that you are
prepared to forgive its few and minor faults. The sound is warm
and lush in the manner of valves (and some MOSFETS) but with
decidedly solid-state precision. Grain is only just discernible
and of such a fine texture that it will only intrude on sparse
passages and particularly crystalline sounds.

Read more on Page 2

The bass is slightly out of character with the authority shown by
the amplifier throughout the midband. Extension is easily on a
par with the monster amplifiers emanating from the USA, but the
sense of weight is not quite so convincing. On overpowering bass
extravaganzas (Sly & Robbie, most house music, Eddy Grant 12in
singles etc), the Valfet delivered the sound if not the mass.
Control was never in question, with transients portrayed with a
crispness which in culinary terms could only be described as al
dente, but the lowest reaches can only be called lean. I should
add that this was only apparent on the well-extended Divas and
the TDLs, with no hint of this condition revealed by the SL700s
or the R1200 Golds.

The treble regions were hard to fault, showing a sweetness and a
resistance to nastiness which again suggested valve
amplification. The treble region, however, is the first area to
reveal any manifestations of overwork on the part of the Valfet.
Although the amplifier coped admirably with every speaker and
could produced ear-bleeding levels it would turn rough and edgy
when fed high-energy material of a relentless nature. In effect,
the Valfet seems to hate heavy metal music (which some would
argue is a sign of its own good taste). I, however, like to rock
out on occasion and found myself asking the Valfet to do a lot
more than it wanted to do. And I would have a hard time living
with an amp that sneers at Guns'n'Roses.

On the other hand, the Valfet is about as refined a performer as
you're likely to find wearing a Union Jack. It deals with
delicate, detailed passages with the care and skill of an Italian
model maker and it's transparent enough to reproduce those subtle
yet crucial clues to the acoustics of the recording venue;
nowhere was this more apparent than on a test pressing of Water
Lily's recent Arturo Delmoni recordings.

But all is not bliss with the Valfet. Now I've been reamed more
than once for dealing too much with non-sonic concerns but I,
unlike some, am aware of other considerations which can influence
a hi-fi purchaser. Admit it or not, finish and aesthetics do play
a part and I refuse to ignore them on some grounds of 'purism'.
It's easy being a purist when you don't have to pay for the hi-fi
equipment or schlep it back and forth when it needs (constant)
repairs.

As far as the Valfet is concerned, it has neither the styling nor
the build integrity of a #4000 purchase. As it must compete with
like-priced products out there in the real world, the Valfet must
be restyled or engineered if it is to challenge the likes of
Krell or Rowland or Audio Research. I know that export is a high
priority for Valfet; let me assure the company that the
appearance of this product in a high-end audio salon in Beverly
Hills or Munich would elicit the exact responses elicited by
British products of yore. And if Jaguar can show the world that
we can produce better styled and assembled cars that Rover
2000TCs and Austin 1100s then it's high time our high-end
manufacturers showed the world that this country is good for
something a damned sight more appealing than a pressed steel box
with flesh-shredding heatsinks.

At present, the Valfet is -- to borrow a great phrase -- a wolf
in cheap clothing. It performs admirably but it does not possess
the perceived value needed to part someone from #4k. Given that
the company is prepared to admit this instead of parrying with
remarks about how many they've already sold to (need you ask?)
British customers, it could become a (global) winner. Or is
Musical Fidelity the only company prepared to take on the foreign
hordes?

Additional Resources
Read audiophile power amp reviews from the likes of Krell, Mark Levinson, Audio Research, Linn, Naim, VAC, VTL, NuForce, Pass Labs and many others here.
Read about tubes on the Audiophile blog, AudiophileReview.com.
• Want to read audiophile stereo preamp reviews? We have dozens from brands like ARC, Krell, Classé and many more.
• In the market for audiophile loudspeakers? Here are over 100 reviews from brands like Wilson Audio, THIEL, MartinLogan, Bowers & Wilkins, PSB, Vandersten, Magnepan and many more.

Subscribe To Home Theater Review

Get the latest weekly home theater news, sweepstakes and special offers delivered right to your inbox
Email Subscribe
HomeTheaterReview Rating
Value: 
Performance: 
Overall Rating: 
© JRW Publishing Company, 2023
As an Amazon Associate we may earn from qualifying purchases.

magnifiercross
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram
Share to...